Hexavalent chromium removal by various adsorbents: Powdered activated carbon, chitosan, and single/multi-walled carbon nanotubes

  • Jung, Chanil
  • Heo, Jiyong
  • Han, Jonghun
  • Her, Namguk
  • Lee, Sung-Jae
  • ... Oh, Jeill
  • 외 2명
Citations

WEB OF SCIENCE

308
Citations

SCOPUS

331

초록

The adsorption behavior of ppb-level aqueous solutions of hexavalent chromium [Cr(VI)] on four different adsorbents was investigated as a function of pH, contact time, initial Cr(VI) concentration, adsorbent dose, and the copresence of competing anions. The adsorbents selected were powered activated carbon (PAC), chitosan, single-walled carbon nanotubes (SWNTs), and multi-walled carbon nanotubes (MWNTs). Each adsorbent was characterized by Fourier transform infrared spectroscopy and measurements of zeta potential to determine its suitability for Cr(VI) adsorption. The adsorption of Cr(VI) was found to be favored at low pH because all adsorbents were positively charged under acidic conditions (pH 4), while a dosage of 100 mg/L resulted in efficient adsorption behavior. PAC and chitosan provided the best removal performance. The highly functionalized and porous PAC and the protonated amines on chitosan enabled a better performance and resulted in high Cr(VI) removal efficiencies of 99.4% and 94.7%, respectively, while the removal efficiencies of SWNTs and MWNTs were 72.9% and 51.9%, respectively. Isotherm and kinetic studies were undertaken to evaluate the characteristics of the Cr(VI) adsorption process. A well-fitted Langmuir isotherm model suggested that monolayer adsorption was the main process operating with an adsorption capacity (q(m)) of 46.9, 35.6, 20.3, and 2.48 mg/g for PAC, chitosan, SWNTs, and MWNTs, respectively. Pseudo second-order fitted models revealed the importance of kinetic parameters (apart from adsorption capacity) in understanding the transport of Cr(VI) in the solution, while an intra-particle diffusion model fitted well for mu g/L levels of Cr(VI) adsorption. This indicated that both physisorption and chemisorption were dominant, particularly for SWNTs. Anions such as Cl- and SO42- in the solution competed with HCrO4- and this phenomenon resulted in negative effects on Cr(VI) adsorption. (C) 2013 Elsevier B.V. All rights reserved.

키워드

Hexavalent chromiumPowdered activated carbonChitosanSingle-walled carbon nanotubesMulti-walled carbon nanotubesAQUEOUS-SOLUTIONWASTE-WATERADSORPTIONCR(VI)KINETICSTHERMODYNAMICSIONSACIDOPTIMIZATIONEQUILIBRIUM
제목
Hexavalent chromium removal by various adsorbents: Powdered activated carbon, chitosan, and single/multi-walled carbon nanotubes
저자
Jung, ChanilHeo, JiyongHan, JonghunHer, NamgukLee, Sung-JaeOh, JeillRyu, JaenaYoon, Yeomin
DOI
10.1016/j.seppur.2012.12.028
발행일
2013-03
유형
Article
저널명
Separation and Purification Technology
106
페이지
63 ~ 71