Highly sensitive method of temperature sensing by using heterodyne detection

초록

In this paper, we propose temperature sensing method by using optical beating. When temperature changes, a peak wavelength of the sensing laser varies slightly. However, with limitation of the optical spectrum analyzer's (OSA) spectral resolution (sub-nm), it is hard to measure the exact quantity of the wavelength variation. Therefore, we used electrical spectrum analyzer (ESA) and two lasers to obtain the wavelength shift. We used DFB-LD (distributed feedback laser diode) and TLS (tunable laser source) to get beating signal. Each of laser has 1550 nm of wavelength, -20 dBm of intensity and 10(8) of Q factor. We varied temperature by 0.1 degrees C from 17.4 degrees C to 18.4 degrees C using TEC (temperature controller). We observed 0.01 nmPC of wavelength change through OSA and 9.5 GHz/degrees C of beating frequency change through ESA. With this result, we verified that we can measure relative temperature change with having ultra-fine resolution of 9.5x10(-7) degrees C theoretically for the ESA resolution bandwidth of 1 kHz. This detecting ability can be applied to highly sensitive temperature sensor.

키워드