상세 보기
Enhanced thermoelectric performance of UV-curable silver(I) selenide-based composite for energy harvesting
- Park, Dabin;
- Lee, Seonmin;
- Kim, Jooheon
WEB OF SCIENCE
16SCOPUS
18초록
Thermoelectric (TE) composites, with photocured resin as the matrix and Ag2Se (AS) as the filler, are synthesized by a digital-light-processing (DLP) based 3D printer. The mixture of diurethane dimethacrylate (DUDMA) and isobornyl acrylate (IBOA) is used as a UV-curable resin because of their low viscosity and high miscibility. Scanning electron microscopy (FE-SEM) images confirm that the filler retains its shape and remains after the UV-curing process. After completing curing, the mechanical and thermoelectric properties of the composite with different AS contents were measured. The addition of the AS filler increases the thermoelectric properties of the cured resin. When the AS contents increase by 30 wt.%, the maximum power factor was obtained (similar to 51.5 mu W/m.K-2 at room temperature). Additionally, due to the phonon scattering effect between the interfaces, the thermal conductivity of composite is lower than that of pristine photoresin. The maximum thermoelectric figure of merit (ZT) is similar to 0.12, which is achieved with 30 wt.% of AS at 300 K with the enhanced power factor and reduced thermal conductivity. This study presents a novel manufacturing method for a thermoelectric composite using 3D printing.
키워드
- 제목
- Enhanced thermoelectric performance of UV-curable silver(I) selenide-based composite for energy harvesting
- 저자
- Park, Dabin; Lee, Seonmin; Kim, Jooheon
- 발행일
- 2021-08-17
- 유형
- Article
- 권
- 11
- 호
- 1
- 언어
- ENG
- 출판사
- NATURE PORTFOLIO
- 발행국가
- 독일
- ISSN
- P 2045-2322