Thermally conductive 3D binetwork structured aggregated boron nitride/Cu-foam/polymer composites

Citations

WEB OF SCIENCE

11
Citations

SCOPUS

13

초록

A 3D filler network structure can significantly improve the thermal conductivity of a composite. In addition, a spherically shaped filler is advantageous for high packing density and filler connectivity compared to other shapes. Here, to achieve a high thermal conductivity, epoxy composites were fabricated using spherically aggregated boron nitride (A-BN) and Cu foam as hybrid fillers. To defoam the composites, A-BN was first incorporated into the matrix with Cu foam by a vacuum impregnation process, followed by a curing process. As the A-BN loading increased up to 25 wt%, the thermal conductivity of the composite also increased due to the formation of a heat path. However, when the filler loading exceeded 25 wt%, the thermal conductivity decreases because of filler aggregation. Thus, the composite containing 25 wt% A-BN exhibited the maximum thermal conductivity (2.017 W/mK), with an enhancement of 940% compared with that without filler. In addition, the incorporation of A-BN is beneficial for increasing the volume resistivity of the composite, allowing its practically insulation (1.21 × 1013 Ω cm). This study shows that the formation of 3D network structures with binary fillers is advantageous for the heat management of electronic devices. © 2020 Elsevier B.V.

키워드

3D Binetwork; Hybrid filler; Polymer-matrix composite; Thermal conductivity; Aggregates; Boron nitride; Copper; Fillers; Foams; III-V semiconductors; Nitrides; 3D-network structures; Electronic device; Epoxy composite; Heat management; High packing density; High thermal conductivity; Vacuum impregnation; Volume resistivity; Thermal conductivity
제목
Thermally conductive 3D binetwork structured aggregated boron nitride/Cu-foam/polymer composites
저자
Lee, Seonmin; Kim, Jooheon
DOI
10.1016/j.synthmet.2020.116587
발행일
2020-12
유형
Article
저널명
Synthetic Metals
권
270