Effect of annealing of graphene layer on electrical transport and degradation of Au/graphene/n-type silicon Schottky diodes

초록

We have investigated the effect of annealing of graphene sheets on the electrical properties of Au/graphene/n-type silicon Schottky diode. Large scale graphene sheets were grown by chemical vapor deposition and then annealed at 300, 400, and 500 degrees C; one sheet was left un-annealed as the control. The diodes were fabricated by transferring the graphene sheets directly onto n-type Si substrates and the current-voltage (I-V) and capacitance-voltage (C-V) characteristics were evaluated. The average values of the Schottky barrier height (SBH) and ideality factor (eta) for the as-fabricated Au/graphene/n-type silicon Schottky diode from I-V measurements were determined to be similar to 0.8 +/- 0.01 eV and similar to 1.79 +/- 0.05, respectively, whereas the SBH from C-V measurements was similar to 0.89 +/- 0.01 eV. The electrical transport characteristics measured at room temperature indicated that annealing of graphene sheet prior to the transfer of the graphene onto the n-Si substrates significantly reduces the electric degradation of the Schottky diodes, even though no distinct differences in other electric properties, including ideality factors and SBHs, before or after annealing of the graphene sheets were observed. Thus, by simply annealing the graphene sheets at 500 degrees C, we found that the Au/graphene/n-type silicon Schottky diode showed an approximately 3.3-fold lower series resistance as compared with the un-annealed Schottky diode under air exposure of up to 7 days. These annealed diodes showed significantly reduced electrical degradation by removing the potentially trapped H2O and/or O-2 at the interface between the graphene layer and the n-Si substrate. (C) 2014 Elsevier B.V. All rights reserved.

키워드