A novel self-tuning wind energy harvester with a slidable bluff body using vortex-induced vibration

Citations

WEB OF SCIENCE

97
Citations

SCOPUS

107

초록

In this study, we propose a novel self-tuning vortex-induced vibration (VIV)-based piezoelectric energy harvesting system with a slidable bluff body configured in a circular cylinder to improve the output energetic performance. Unlike common frequency tuning techniques, we use the balance of the two inherent forces in a vibratory VIV-based energy harvester under operation, i.e., drag and centrifugal forces. First, we theoretically investigate the force and response characteristics of the system to estimate the range of the essential design parameters. Subsequently, a series of measurements are carried out to validate the effectiveness of the proposed system. The sliding mechanism of the bluff body due to the action of the two forces is thoroughly explained using both theoretical and experimental investigations. The sliding mechanism, both in the inner and outer directions, is understood through measurements performed with different bluff body heights. The results reveal that a structural natural frequency range of approximately 6–10 Hz and a broadband lock-in range of approximately 1–2.7 m/s can be realized with the parameters considered in this study. The experimental results show that a significant overall average power increase of 110% is obtained for the proposed energy harvester with the dimensionless bluff body height of 1.5 compared to the reference system in the wind velocity range of concern. © 2020 Elsevier Ltd

키워드

Broadband energy harvesting; Force balance; Lock-in region; Natural frequency tuning; Self-sliding cylinder; Vortex-induced vibration; CYLINDER; EFFICIENCY; FLOW
제목
A novel self-tuning wind energy harvester with a slidable bluff body using vortex-induced vibration
저자
Sun W.; Seok J.
DOI
10.1016/j.enconman.2020.112472
발행일
2020-02-01
유형
Article
저널명
Energy Conversion and Management
권
205