Performance of RPL Routing Protocol over Multihop Power Line Communication Network

Citations

WEB OF SCIENCE

7
Citations

SCOPUS

7

초록

Power line communication (PLC) is one of the key method of communication for electrical systems due to its advantage in using existing power line infrastructure. It can be used for emerging smart grid applications such as the advanced metering infrastructure (AMI) where embedded smart meters report electricity usage autonomously. To enable AMI over PLC, however, a suitable networking protocol is required. RPL is the IETF standard of IPv6 routing protocol for low power and lossy networks, designed mainly to support multihop wireless networking between resource constrained embedded devices. To understand the performance and potentials of RPL over PLC, this work implements a RPL-based network architecture over a multihop PLC network, and evaluates the performance of RPL over PLC through extensive real-world testbed experiments using 18 PLC devices. The result shows that the standard RPL with OF0 is not suitable for PLC network, and motivates a necessity of a new path selection algorithm. © 2020 IEEE.

키워드

Internet of Things (IoT); low-power and lossy netework (LLN); power line communication (PLC); routing protocol for LLN (RPL); smart grid; Advanced metering infrastructures; Carrier transmission on power lines; Electric power measurement; Electric power transmission networks; Low power electronics; Network architecture; Network routing; Routing protocols; Smart power grids; Electrical systems; Electricity usage; Multihop wireless networking; Networking protocols; Path selection algorithms; Power line communication networks; Power line communications (PLC); Smart grid applications; Internet protocols
제목
Performance of RPL Routing Protocol over Multihop Power Line Communication Network
저자
Park, M.; Jeong, G.; Son, H.; Paek, Jeongyeup
DOI
10.1109/ICTC49870.2020.9289175
발행일
2020-10
유형
Conference Paper
저널명
International Conference on ICT Convergence
권
2020-October
페이지
1918 ~ 1920