Improving thermal conductivity of epoxy composite by three-dimensional filler network constructed with two different diameters aluminum nitride and cellulose nanofiber

Citations

WEB OF SCIENCE

10
Citations

SCOPUS

11

초록

With the rapid advances in electronic technology, efficient thermal dissipation has become a critical concern, and as a result, polymer composites are being utilized as various industrial areas. However, the relatively low thermal conductivity of polymers is a limitation that must be overcome. Hence, in this study, we prepared a 10-mu m aluminum nitride (AlN)@cellulose nanofiber (CNF) filler through a ball milling method. Following this, a 3D cellulose foam was fabricated using the AlN@CNF and a 4-mm aluminum nitride, which was obtained through freeze drying. Finally, the 3D foam was vacuum infiltrated with epoxy (EP) resin to fabricate the 3D-AlN@CNF1/AlN1/CNF/EP composite. Specifically, the 3D foam provided a continuous and efficient heat pathway, which increased the thermal conductivity from 0.2 to 1.88 W/mK with a 46.5 v/v% AlN loading. Additionally, the tensile stress and tensile strain were 34.8 MPa and 4.6%, respectively. Overall, these results suggest that the proposed 3D-AlN@CNF/AlN/EP composite is a promising material for efficient thermal management in various electronic devices.

키워드

Thermal conductivity; Aluminum nitride; 3D foam structure; Surface treatment
제목
Improving thermal conductivity of epoxy composite by three-dimensional filler network constructed with two different diameters aluminum nitride and cellulose nanofiber
저자
Yang, Wonyoung; Kim, Jihoon; Kim, Jooheon
DOI
10.1007/s10570-024-05737-8
발행일
2024-03
유형
Article
저널명
Cellulose
권
31
호
4
페이지
2461 ~ 2474