Mmwave high gain planar h‐shaped shorted ring antenna array

Citations

WEB OF SCIENCE

11
Citations

SCOPUS

13

초록

A new design approach for a mmWave high gain planar antenna is presented. The proposed method can increase antenna directivity with a minimally enlarged radiation patch while the operation frequency is still matched at a higher target frequency. The fundamental structure of the proposed antenna is configured by a H‐shaped and slot‐loaded patch with a shorting pin symmetrically located across a signal excitation port. Further, to match the operation frequency with the frequency for the highest achievable gain, a vertically stacked matching conductor was inserted along the signal feed path between the radiation patch and the ground layer. The proposed single antenna showed the simulated directivity of 9.46 dBi while the conventional patch with a same dielectric had 8.07 dBi. To verify practical performance, a 2 × 2 array antenna was fabricated at 28 GHz and showed the measured gain of 12.5 dBi including the array feed loss. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.

키워드

Antenna matching; High gain antenna; MmWave antenna array; Slot‐loaded antenna; Antenna arrays; Antenna feeders; Microwave antennas; Millimeter waves; Antenna directivity; Design approaches; Fundamental structures; Operation frequency; Planar antennas; Ring antenna arrays; Signal excitation; Target frequencies; Slot antennas
제목
Mmwave high gain planar h‐shaped shorted ring antenna array
저자
Kim, Y.-J.; Kim, Y.-B.; Lee, H.L.
DOI
10.3390/s20185168
발행일
2020-09
유형
Article
저널명
Sensors
권
20
호
18
페이지
1 ~ 11

파일 다운로드

Thumbnail